Why VEER motor can ensure the quality of gear reduction motor for customers?

Why VEER motor can ensure the quality of gear reduction motor for customers?

Many customers are asking VEER Motor from all over the world, why you can ensure so good quality of gear reduction motor for customers? Our answers to the customer’s questions are as follows:

Why VEER motor can ensure the quality of gear reduction motor for customers?

Why VEER motor can ensure the quality of gear reduction motor for customers?

Each parts of gear reduction motor are with good quality and high standard, which introduction as below:

  1. Gear assembly: The grades of 1st/2nd/3rd gear wheel, 2nd/3rd gear shaft, motor gear shaft are 2-3, 1-2, 1-2. After high frequency heat treatment, the hardness will up to 61.5 degrees. High precision, low noise, high hardness, wear resistance, and long service life!
  2. Electric motor: Introduced advanced technology, adopt fully sealed aluminum shell, low temperature rise, high operating efficiency, long service life.
  3. Bearing: Adopt famous brand bearing, better transmission performance.
  4. Brake: The brake is imported from Japan, non-asbestos brake material, up to 3 million times of service life is twice as long as the domestic one.
  5. Oil seal: The oil seal is mainly with high temperature of VITON used on the side of motor shaft to prevent lubricating oil is leaking back into the motor internal.
  6. Junction box: Aluminum junction box, protection grade up to IP67, with better waterproof and rust resistance.
  7. Motor body: All airtight and special motor aluminum shell, waterproof and rustproof, easy to heat, high efficiency
  8. Lubricating oil: Use high performance lubricating oil (BT-860-0), maintenance-free within 20000 hours.
How to adjust gear motor rotate speed? We are gear motor supplier.

How to calculate gear ratio of gear reduction motor?

The “reduction” or gear ratio is calculated by dividing the number of teeth on the large gear by the number of teeth on the small gear. For example, if an electric motor drives a 13-tooth pinion gear that meshes with a 65-tooth gear, a reduction of 5:1 is achieved (65 / 13 = 5). If the electric motor speed is 1,500 rpm, the gearbox reduces this speed by five times to 300 rpm. If the motor torque is 10 lb-in, the gearbox increases this torque by a factor of five to 50 lb-in (before subtracting out gearbox efficiency losses).

How to adjust gear motor rotate speed? We are gear motor supplier. Gear Reduction Motor, Gear Motor Reduction Ratio, gear motor gear ratio, gear motor teeth, gear reduction motor torque, electric gear motor, how to increase the gear motor torque

How to adjust gear motor rotate speed? We are gear motor supplier.

For more about calculating gear ration (reduction) of gear motor, please contact us by email: sales@veermotor.com, or visit our official website: https://www.veermotor.com/