Small AC Electric Gear Reducer Motor 120W 1-Phase/3-Phase 110V/220V/380V (Gearbox Size: 90*90mm)

Description

 

Technical Parameter Sheet of Geared Motor

Motor Model Power (W) Voltage (V) Frequency (Hz) Current (A) Starting Torque (mN.m) Rated Torque (mN.m) Rated Speed (r/min) Rated Time (min) Capacitance (μF/VAC)
Veer’s Model Standard Model
Induction Motor

Variable Speed Motor

Brake Motor

90YYJT120-1 5IK120(R)GN-A 120 1-phase/110 50 1.70 625 890 1300 Continuous 24/250
60 1.57 518 738 1500
90YYJT120-3 5IK120(R)GN-C 1-phase/220 50 0.85 625 890 1300 6.0/450
60 0.78 518 738 1500
90YSCJ120-3 5IK120GN-S 3-phase/220 50 0.59 2000 890 1300
60 0.54 1660 738 1500
90YSCJ120-4 5IK120GN-U 3-phase/380 50 0.34 2000 890 1300
60 0.31 1660 738 1500

Notes:
1) The parameters in the above sheet refer to only geared motor itself, without any load attached.
2) The permissible variation range of the rated rotate speed, and rated current of the motor is within ±%5.

 

Allowable Torque Sheet of Geared Motor

Reduction Ratio 3 3.6 5 6 7.5 9 10 12.5 15 18 20 25 30 36 40 50 60 75 90 100 120 150 180 200 250 300
50Hz REV. (r/min) 500 417 300 250 200 166 150 120 100 83 75 60 50 41 37 30 25 20 16 15 12.5 10 8.3 7.5 6 5
Torque (N.m) 2.0 2.40 3.33 4.00 5.00 6.00 6.66 8.33 10.0 12.0 13.3 16.6 20
Torque (kgf.cm) 20 24 33.3 40 50 60 66.6 83.3 100 120 133 166 200
60Hz REV. (r/min) 600 500 360 300 240 200 180 144 120 100 90 72 60 50 45 36 30 24 20 18 15 12 10 9 7.2 6
Torque (N.m) 1.66 2.00 2.77 3.32 4.15 4.98 5.53 6.91 8.30 9.96 11.1 13.8 16.6 20
Torque (kgf.cm) 16.6 20 27.7 33.2 41.5 49.8 55.3 69.1 83 99.6 111 138 166 200

Notes:
1) The rotate speed is calculated from synchronous speed of the motor dividing reduction ratio. Actual rotate speed will decrease about 2-20% from theoretical rotate speed along with load changes.
2) If you want the reduction ratio is greater than the sheet above, please install a new reducer between motor and existing reducer, which reduction ratio is about 10.

 

Optional Models of 120W Geared Motor

① Circular Shaft Model ② GK Junction Box Model
Drawing of 90W Circular Shaft Geared Motor Drawing of 90W GK Geared Motor with Junction Box
Structure: Motor Structure: Reducer+Motor+Junction Box
③ GK Constant Speed Model ④ GS Junction Box Model
Drawing of 90W GK Constant Speed Geared Motor Drawing of 90W GS Geared Motor with Junction Box
Structure: Reducer+Motor Structure: Reducer+Motor+Junction Box
⑤ GS Constant Speed Model ⑥ GS Variable Speed Model
Drawing of 90W GS Constant Speed Geared Motor Drawing of 90W GS Variable Speed Geared Motor
Structure: Reducer+Motor Structure: Reducer+Motor+Speed Controller (Additional)
⑦ GS Constant Speed with Brake Model ⑧ GS Variable Speed with Brake Model
Drawing of 90W GS Constant Speed Geared Motor with Brake Drawing of 90W GS Variable Speed Geared Motor with Brake
Structure: Reducer+Motor+Brake (Additional) Structure: Reducer+Motor+Brake+Speed Controller (Additional)

 

Model Selection Guide of 120W Geared Motor

Model Selection Guide of Small Geared Motor from VEER Motor

Veer Geared Motors can be used in industrial fields as food & beverage, energy, wastewater, concrete, metals and material handling on applications such as washdown conveyor systems, rolling mills, monorail systems and overhead conveyors, sludge thickeners, cranes, fans & blowers and turbines.