Description
Selection Guide of Shaft 18mm 0.1-0.7KW Medium Geared Motor
Model Selection Guide of Shaft 18mm 0.1-0.7KW Medium Geared Motor
Optional Models of Shaft 18mm 0.1-0.7KW Medium Geared Motor
| ① GH Model (Horizontal Foot Mount) | ② GV Model (Vertical Flange Mount) |
|---|---|
 |
 |
Allowable Torque Sheet of Shaft 18mm 0.1-0.7KW Medium Geared Motor
| Nominal Speed Ratio | 0.1KW | 0.2KW | 0.4KW | 0.55KW | 0.7KW | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| 50Hz | 60Hz | 50Hz | 60Hz | 50Hz | 60Hz | 50Hz | 60Hz | 50Hz | 60Hz | |
| M₂ (Nm) | M₂ (Nm) | M₂ (Nm) | M₂ (Nm) | M₂ (Nm) | ||||||
| 3 | 2.1 | 1.7 | 4.0 | 3.3 | 7.6 | 6.5 | 11.0 | 9.2 | 13.1 | 11.1 |
| 5 | 3.3 | 2.8 | 6.7 | 5.6 | 13.0 | 10.8 | 18.4 | 15.4 | 22.2 | 19.1 |
| 7.5 | 5.3 | 4.3 | 9.8 | 8.3 | 18.8 | 16.3 | 27.5 | 22.8 | 32.8 | 27.8 |
| 12 | 7.9 | 6.7 | 16.1 | 13.4 | 31.2 | 25.9 | 44.2 | 36.8 | 53.3 | 45.8 |
| 20 | 13.0 | 10.8 | 25.9 | 21.6 | 51.8 | 43.2 | 71.3 | 59.4 | 90.7 | 75.6 |
| 30 | 19.4 | 16.2 | 38.9 | 32.4 | 78.8 | 64.8 | 107.0 | 89.1 | 136.1 | 113.9 |
| 40 | 23.8 | 20.5 | 49.7 | 42.1 | 100.4 | 84.2 | 136.6 | 115.8 | 176.4 | 147.2 |
| 50 | 30.2 | 25.9 | 61.6 | 51.8 | 125.3 | 104.8 | 169.3 | 142.6 | 220.8 | 184.5 |
Notes:
1) The rotate speed is based on synchronous speed of the motor (50Hz: 1500r/min; 60Hz: 1800r/min). Actual rotate speed is about 80-98% of the listed speed under rated load.
Structure of Medium Geared Motor
 |
| Item No. | Item Name | Item No. | Item Name | Item No. | Item Name |
|---|---|---|---|---|---|
| 1A | Horizontal Housing | 14 | 3rd Slotting | 28 | Wave Gasket |
| 1B | Vertical Housing | 15 | 2nd Gear | 29 | Bearing |
| 2 | Front Cover | 16 | C-shape Snap Ring | 30 | Gear Shaft |
| 3 | Oil Ring | 17 | 3rd Bearing | 31 | Rotor |
| 4 | Oil Seal for Output Shaft | 18 | 2nd Bearing | 32 | Bearing |
| 5 | Output Shaft Bearing | 19 | 2nd Gear Shaft | 33 | Stator |
| 6 | Output Slotting | 20 | 2nd Slotting | 34 | Junction Box |
| 7 | Output Shaft | 21 | 1st Gear | 35 | Rear Cover |
| 8 | 3rd Slotting | 22 | C-shape Snap Ring | 36 | Screw for Fan Cover |
| 9 | 3rd Gear | 23 | 2nd Bearing | 37 | Oil Seal for Rear Cover |
| 10 | C-shape Snap Ring | 24 | Oil Seal for Input Shaft | 38 | Bolt |
| 11 | Self-lubricating Oil Seal for Output Shaft | 25 | Pin | 39 | Fan |
| 12 | 2nd Bearing | 26 | O-shape Ring | 40 | Fan Cover |
| 13 | 3rd Gear Shaft | 27 | Inner Hexagon Screw |
